5,653 research outputs found

    Texas LPG fire: Domino effects triggered by natural hazards

    Full text link
    © 2018 Institution of Chemical Engineers On February 2007, a massive fire in a propane de-asphalting unit in an oil refinery in Texas, USA happened due to liquid propane release from a cracked pipe in a control station injuring four people, damaging extensive equipment, causing significant business interruption, and resulting in more than $50 million losses. The accident was triggered by a natural hazard: freezing of piping at a control station caused an inlet pipe elbow to crack, which in turn, led to the release of high-pressure liquid propane which was rapidly ignited. In addition, there were two near-miss events due to potential domino effects. In fact, the accident could reasonably have resulted in much more severe consequences due to the exposure of large butane storage spheres and chlorine containers, increasing the possibility of a catastrophic domino effect. This paper develops a Natech (natural hazard triggering technological disasters) risk assessment methodology that relies upon Bayesian network capabilities and takes into account the potential Natech domino effects. The methodology is implemented in the intended refinery and mathematically graphically represents the dynamic cause–effect relations between units involved in the scenario, and handles uncertainties among the interactions. In addition, the methodology can provide a risk value for the entire scenario that can be used further for risk-based decision making

    Evaluating the effects of climate on weathering processes of rocks based on Peltier models in Kermanshah province

    Get PDF
    Weathering is a result of physical, chemical and biological factors, all of which affect the rocks but do not cause Material Handling. The existence of pores and crevices and cracks in the rocks expose the rocks to physical and chemical attack, gradual wracking and being weathered. This study has been based on Louis Peltier’s models in which two mean annual temperature and precipitation variables are used. Peltier identified seven models using these two variables which can describe different types of weathering phenomena. Among these models, two models related to weathering regimes and morphogenetic regimes were evaluated in case of Kermanshah province and the regimes related to each station were determined from the related diagrams. Climate data such as mean annual temperature and precipitation and eight synoptic stations which had appropriate data and statistical length were taken from meteorological organization and then were recorded in a database in GIS environment for studying and zoning of the weathering status and geomorphological regions in Kermanshah. Then, the regimes relating to each station were determined from Peltier models after evaluation of temperature and precipitation processes in the study area which were recorded in the database after giving weighted value to them and then the related maps were generated in ARC map environment. The obtained results showed that most parts of Kermanshah province are semi-arid regions. Chemical weathering along with glacial action to moderate chemical weathering take place in in Kermanshah province in terms of weathering status.Keywords: Weathering regimes, Peltier model, morphogenetic regions, Kermanshah

    A Human Situation Awareness Support System to Avoid Technological Disasters

    Full text link
    In many complex technological systems, accidents have primarily been attributed to human error. In the majority of these accidents the human operators were striving against significant challenges. They have to face data overload, the challenge of working with a complex system and the stressful task of understanding what is going on in the situation. Therefore, to design and implement complex technological systems where the information flow is quite high, and poor decisions may lead to serious consequences, Situation Awareness (SA) should be appropriately considered. A level 1 SA is highly supported in these systems through the various heterogeneous sensors and signal-processing methods but, for levels 2 and 3 there is still a need for concepts and methods. This work develops a system called the Human Situation Awareness Support System (HSASS) that supports the safety operators in an ever increasing amount of available risky status and alert information. The proposed system includes a new dynamic situation assessment method based on risk, which has the ability to support the operators understanding of the current state of the system, predict the near future, and suggest appropriate actions. The proposed system does not control the course of action and allows the human to act at his/her discretion in specific contexts

    Design and Test of a Forward Neutron Calorimeter for the ZEUS Experiment

    Get PDF
    A lead scintillator sandwich sampling calorimeter has been installed in the HERA tunnel 105.6 m from the central ZEUS detector in the proton beam direction. It is designed to measure the energy and scattering angle of neutrons produced in charge exchange ep collisions. Before installation the calorimeter was tested and calibrated in the H6 beam at CERN where 120 GeV electrons, muons, pions and protons were made incident on the calorimeter. In addition, the spectrum of fast neutrons from charge exchange proton-lucite collisions was measured. The design and construction of the calorimeter is described, and the results of the CERN test reported. Special attention is paid to the measurement of shower position, shower width, and the separation of electromagnetic showers from hadronic showers. The overall energy scale as determined from the energy spectrum of charge exchange neutrons is compared to that obtained from direct beam hadrons.Comment: 45 pages, 22 Encapsulated Postscript figures, submitted to Nuclear Instruments and Method

    Measurement of the diffractive structure function in deep inelastic scattering at HERA

    Full text link
    This paper presents an analysis of the inclusive properties of diffractive deep inelastic scattering events produced in epep interactions at HERA. The events are characterised by a rapidity gap between the outgoing proton system and the remaining hadronic system. Inclusive distributions are presented and compared with Monte Carlo models for diffractive processes. The data are consistent with models where the pomeron structure function has a hard and a soft contribution. The diffractive structure function is measured as a function of \xpom, the momentum fraction lost by the proton, of β\beta, the momentum fraction of the struck quark with respect to \xpom, and of Q2Q^2. The \xpom dependence is consistent with the form \xpoma where a = 1.30 ± 0.08 (stat) − 0.14+ 0.08 (sys)a~=~1.30~\pm~0.08~(stat)~^{+~0.08}_{-~0.14}~(sys) in all bins of β\beta and Q2Q^2. In the measured Q2Q^2 range, the diffractive structure function approximately scales with Q2Q^2 at fixed β\beta. In an Ingelman-Schlein type model, where commonly used pomeron flux factor normalisations are assumed, it is found that the quarks within the pomeron do not saturate the momentum sum rule.Comment: 36 pages, latex, 11 figures appended as uuencoded fil

    Measurement of inclusive D*+- and associated dijet cross sections in photoproduction at HERA

    Get PDF
    Inclusive photoproduction of D*+- mesons has been measured for photon-proton centre-of-mass energies in the range 130 < W < 280 GeV and a photon virtuality Q^2 < 1 GeV^2. The data sample used corresponds to an integrated luminosity of 37 pb^-1. Total and differential cross sections as functions of the D* transverse momentum and pseudorapidity are presented in restricted kinematical regions and the data are compared with next-to-leading order (NLO) perturbative QCD calculations using the "massive charm" and "massless charm" schemes. The measured cross sections are generally above the NLO calculations, in particular in the forward (proton) direction. The large data sample also allows the study of dijet production associated with charm. A significant resolved as well as a direct photon component contribute to the cross section. Leading order QCD Monte Carlo calculations indicate that the resolved contribution arises from a significant charm component in the photon. A massive charm NLO parton level calculation yields lower cross sections compared to the measured results in a kinematic region where the resolved photon contribution is significant.Comment: 32 pages including 6 figure

    Search for the standard model Higgs boson in the H to ZZ to 2l 2nu channel in pp collisions at sqrt(s) = 7 TeV

    Get PDF
    A search for the standard model Higgs boson in the H to ZZ to 2l 2nu decay channel, where l = e or mu, in pp collisions at a center-of-mass energy of 7 TeV is presented. The data were collected at the LHC, with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. No significant excess is observed above the background expectation, and upper limits are set on the Higgs boson production cross section. The presence of the standard model Higgs boson with a mass in the 270-440 GeV range is excluded at 95% confidence level.Comment: Submitted to JHE

    Single hadron response measurement and calorimeter jet energy scale uncertainty with the ATLAS detector at the LHC

    Get PDF
    The uncertainty on the calorimeter energy response to jets of particles is derived for the ATLAS experiment at the Large Hadron Collider (LHC). First, the calorimeter response to single isolated charged hadrons is measured and compared to the Monte Carlo simulation using proton-proton collisions at centre-of-mass energies of sqrt(s) = 900 GeV and 7 TeV collected during 2009 and 2010. Then, using the decay of K_s and Lambda particles, the calorimeter response to specific types of particles (positively and negatively charged pions, protons, and anti-protons) is measured and compared to the Monte Carlo predictions. Finally, the jet energy scale uncertainty is determined by propagating the response uncertainty for single charged and neutral particles to jets. The response uncertainty is 2-5% for central isolated hadrons and 1-3% for the final calorimeter jet energy scale.Comment: 24 pages plus author list (36 pages total), 23 figures, 1 table, submitted to European Physical Journal

    Measurements of branching fraction ratios and CP-asymmetries in suppressed B^- -> D(-> K^+ pi^-)K^- and B^- -> D(-> K^+ pi^-)pi^- decays

    Get PDF
    We report the first reconstruction in hadron collisions of the suppressed decays B^- -> D(-> K^+ pi^-)K^- and B^- -> D(-> K^+ pi^-)pi^-, sensitive to the CKM phase gamma, using data from 7 fb^-1 of integrated luminosity collected by the CDF II detector at the Tevatron collider. We reconstruct a signal for the B^- -> D(-> K^+ pi^-)K^- suppressed mode with a significance of 3.2 standard deviations, and measure the ratios of the suppressed to favored branching fractions R(K) = [22.0 \pm 8.6(stat)\pm 2.6(syst)]\times 10^-3, R^+(K) = [42.6\pm 13.7(stat)\pm 2.8(syst)]\times 10^-3, R^-(K)= [3.8\pm 10.3(stat)\pm 2.7(syst]\times 10^-3, as well as the direct CP-violating asymmetry A(K) = -0.82\pm 0.44(stat)\pm 0.09(syst) of this mode. Corresponding quantities for B^- -> D(-> K^+ pi^-)pi^- decay are also reported.Comment: 8 pages, 1 figure, accepted by Phys.Rev.D Rapid Communications for Publicatio

    Standalone vertex nding in the ATLAS muon spectrometer

    Get PDF
    A dedicated reconstruction algorithm to find decay vertices in the ATLAS muon spectrometer is presented. The algorithm searches the region just upstream of or inside the muon spectrometer volume for multi-particle vertices that originate from the decay of particles with long decay paths. The performance of the algorithm is evaluated using both a sample of simulated Higgs boson events, in which the Higgs boson decays to long-lived neutral particles that in turn decay to bbar b final states, and pp collision data at √s = 7 TeV collected with the ATLAS detector at the LHC during 2011
    • …
    corecore